Modelling and management of distribution networks using high-resolution synchronised measurements |
Dr Sasa Djokic
|
This project will develop improved methodologies and tools for assessing and providing more detailed information on complex system-user interactions, which will be further implemented in an integrated framework for system state identification, system or plant/component condition assessment and evaluation of the overall system performance (all currently performed in a number of separate studies).
|
Off-grid Hybrid Energy Systems |
Dr Jonathan Shek
|
This project aims to innovate and improved solutions for the management of power flows in a hybrid electrical power system, to provide a secure, reliable, and high quality supply to varying load demands. The expected research outcome is the design of a robust and fault-tolerant management system, featuring higher efficiency and improved techno-economic performance.
Optimal system sizing through linear programming
Testing and analysis of an off-the-shelf hybrid system
Novel control system design for optimised performance
Lab testing and field testing
|
On the Leading Edge Vortex in Highly Turbulent Flow Conditions |
Dr Ignazio Maria Viola
|
Bio-inspired foils for low-speed performance of renewable energy converters
|
Optimal Design of Very Large Tidal Stream Farms: for Shallow Estuarine Applications |
Dr Tom Bruce
|
This project is a collaboration between SuperGen Marine, the Exeter Centre for Water Resources (Non-SuperGen), Penn State University, Aquascientific Ltd., The Danish Hydraulics Research Institute and is mentored by Garrad Hassan partners. The primary goal is the introduction of a new hybrid optimisation approach that allows the multi-objective optimal design of the layout and power loadings of marine energy farms subject to environmental impacts. It involves a new, academically highly challenging integrated analytic/numerical/experimental, approach to optimising the performance of large tidal stream energy capture farms. The specific application focus involves tidal turbines suited to operating in shallow medium flow estuaries but the technique can be applied to all types of marine energy farms. Optimisation is subject to minimising flood risk, with further environmental impacts, such as sediment transport driven outcomes, being capable of subsequent incorporation as slow timescale effects. The work complements the PERAWAT project and has key partners in common.
|
PolyWEC: New mechanisms and concepts for exploiting electroactive Polymers for Wave Energy Conversion |
Professor David Ingram
|
Wave energy has a great potential as renewable source of electricity. Studies have demonstrated that significant percentage of world electricity could be produced by Wave Energy Converters (WECs). However electricity generation from waves still lacks of spreading because the combination of harsh environment and form of energy makes the technical development of cost effective WECs particularly difficult.
|
RealTide |
Prof David Ingram
|
The aim of the RealTide project is to identify main failure causes of tidal turbines at sea and to provide a step change in the design of key components, namely the blades and power take-off systems, adapting them more accurately to the complex environmental tidal conditions. Advanced monitoring systems will be integrated with these identified sub-systems and together with maintenance strategies will be implemented at outset from the design stage to achieve an increased reliability and improved performance over the full tidal turbine life.
|
Small Scale Hydrogen Storage for Integrated Energy Systems |
Dr Dimtri Mignard
|
The integration of a greater proportion of renewable energy, compounded by the rise in small scale distributed generation, is making it increasingly difficult to balance demand and supply of electricity without adequate energy storage facilities. However, the effective deployment of these solutions at any particular location will require an understanding of the local energy system at the time. Conversion between energy vectors will also be required not just to meet storage needs, but also to allow major shifts from fossil fuels to low carbon energy in applications like heat and transport. Hydrogen is an energy vector that is particularly versatile from this viewpoint.
|
Structural Design of Wave Energy Devices |
Professor David Ingram
|
The Structural Design of Wave Energy Devices project (SDWED) 2010-2014 is an international research alliance supported by the Danish Council for Strategic Research. The project is a five-year endeavour to harness the energy potential in wave energy at competitive costs.
|
SuperGen UK Centre for Marine Energy Reseach |
Prof Robin Wallace
|
UKCMER is the third phase of EPSRC investment in collaborative wave and tidal energy research. Edinburgh has led all three phases since 2003. There are 13 partner universities in the Centre working together on 15 projects. They work together to ensure joined-up regional, disciplinary and thematic effort to help meet the challenges in accelerating deployment towards and through 2020 targets
|
TEDDINET: Network of (Build) TEDDI projects |
Professor Gareth Harrison
|
Established in September 2013 and funded for four years, TEDDINET is a research network examining the interactions of people with digital technologies and the potential for smart metering to transform energy demand in the home and at work. TEDDINET’s primary purpose is to create added value and enhance the impact of 22 individual research projects funded under the ‘Transforming Energy Demand through Digital Innovation’ (TEDDI) and ‘Transforming Energy Demand in Buildings through Digital Innovation’ (BuildTEDDI) programmes. Sponsored by the UK Engineering and Physical Sciences Research Council (EPSRC), these 22 projects encompass 26 (UK) universities, 75 partners from industry and the housing sector, and over 200 researchers from engineering, informatics, design and social sciences.
|